10 Best Dual Voltage MIG Welders – A Comprehensive Guide

When a job requires a welder, you’ll want to make sure that you’re using the right tool for the job. This guide will help you find the right dual voltage MIG welder for your needs.

If you’re a professional welder, the best dual voltage MIG welder is essential for you. A dual voltage MIG welder is able to use two sources of power. This allows you to run a circuit from your main power source or from a portable generator. Due to the fact that it has two sources of power, this helps prevent overheating, which can often damage your equipment and cause unnecessary downtime.

This guide will provide additional information about how to choose a dual voltage MIG welder. Read on to find out which one is the best fit for your job from our 10 top-rated MIG welders.

Our Top 3 Pick is

Table setup not completed.

The 10 Best Dual Voltage MIG Welders

1. ESAB EMP215IC Dual Voltage MIG Welder

The Rebel EMP 215ic is a true multi-process welder, which means whether you’re welding MIG, Flux-Cored, Stick – even those tricky 6010 rods – or TIG, it will perform like it was born to run that process.

You need a machine that’s as tough as you are; one capable of taking the hits, literally and figuratively. The Rebel EMP 215ic is the go-anywhere machine for a reason. Best of all, the Rebel EMP 215ic comes with ESAB’s legendary three-year, handle-to-handle guarantee and 100 percent satisfaction guarantee that covers everything.

So if you are searching for the best budget dual voltage MIG welder for heavy duty welding, the next best bet is the Rebel EMP 215ic Welder.

This welder operates on either a single voltage or dual voltage so you will have the choice depending on your application. Since this welder is suitable for industrial and professional use, it is incredibly durable and built for heavy duty uses. The only drawback to this welder is that it is quite heavy which makes moving it a bit more difficult, because of this welder weight is 79.2 pounds.

Check these 6 Best 220v Flux Core Welders.

2. Everlast PowerMIG 230i Dual Voltage MIG Welder

The Everlast PowerMIG 230i is a dual voltage MIG welder that has been designed to be easy to use, as well as heavy duty. Simply attach the supplied face shield and start welding in both DC and AC mode with just the flick of a switch.

Having both low voltage DC and high voltage AC capabilities at 220V, the Everlast PowerMIG 230i offers real versatility for those who demand even more from their equipment. It is also an important consideration for welders working in the Australian mining industry.

Everlast PowerMIG 230i benefits from a solid aluminium alloy construction, with a powerful 220V DC output, that delivers up to 230 amps of power. It also offers good voltage regulation and an impressive 40 amp rating. PowerMIG 230i also features redundant circuit protection so it is suitable for use in the dangerous environments associated with certain types of welding.

With it twin cooling fan design, the PowerMIG 230i has been designed to be ultra quiet when in operation and to provide exceptional arc performance. It is easy to use and with its impressive welding range, it is suitable for professional welders such as those found at the mines.

Another advantage of the Everlast PowerMIG 230i is digitally controlled IGBT inverter technology that helps to produce high quality MIG and Flux-Cored welding results. It provides major benefits when welding aluminium, stainless steel, galvanised steel and other ferrous metals.

Read more: 7 Best Budget 220V MIG Welders.

3. Weldpro 200 Amp Inverter Multi Process Welder

This is something that anyone who owns a machine shop should have to help them out in the field. This unit comes with a 200 Amp inverter and 3 processes including stick, TIG and MIG welding. This makes it a fast way for someone to learn how to weld without having to purchase an budget friendly machine for the task.

I have had a lot of welding friends over the years. Most of them came with a bunch of welding projects they wanted to do and I lent a helping hand. I have seen them make mistakes, have downtime, and best of all see the smiles on their face after they weld something that was a problem in the past.

When you are looking for a machine to weld aluminum, this is the one to use. Weldpro 200 Amp is an electric welders that works great on aluminum and mild steel. You will find it can easily weld sheet metal and even some thin walled equipment such as drill presses, saws and small grinder machines without much trouble at all.

This is also capable of true lift TIG welding without foot pedal that can hold up to 200 amps of welding power. Lots of folks who own industrial shop use this welders because it is a great option for aluminum and very good for sheet metal.

Watch these 10 Best 120v Flux Core Welders.

4. AmicoPower MTS-205 Dual Voltage Combo Welder

Features of the MTS-205 include all the functions of multiple welding machines in one, including MIG, MAG, Flux core, Lift TIG and stick. It can weld all conductive metals: aluminum up to around 1/2″ thick.

The machine is very easy to carry and use for beginners; it also has a variety of safety protection functions like automatic voltage compensation, over-heat protection and short circuit protection. MTS-205 also has an intelligent power supply system that automatically detects the power input and switches between 110V and 230V automatically. That’s why it called the best dual voltage mig welder.

With a variety of welding modes (MIG, MAG, Flux core, Lift TIG and stick) and many automatic setting functions (like current, wire-feeding speed), this machine can weld all kinds of metals easily.

The machine uses a high quality wire feeder to ensure smooth and stable wire feeding. This makes it very easy to adjust the welding current and wire-feeding speed, even for beginners. And the output of the machine is easily adjustable according to thickness and polarity is easily altered according to the type of wire. It uses a high quality wire feeder that allows you to set the amperage and voltage precisely, making it easy for even beginners to use smoothly.

Read next: 8 Best Beginner Multi Process Welders.

5. PrimeWeld MIG180 Dual Voltage MIG Welder

A welders is a great addition to any small town or large city. There are many different sizes and types of MIG welders that are available on the market today, but there are certain features that you must look for when shopping for a hobbyist or professional!

It is important to note that no two welders will be alike when it comes to their operating temperature, voltage and amperage ranges. Whichever welding machine you choose make sure that it can work within the areas in which you intend to use it. For example, if you are going to be using it inside your current home or building make sure that it is rated for indoor use.

It is also important to know if the machine is capable of being used within areas of extreme weather such as rain or snow. Many welders have been known to overheat in these conditions and have even caused a fire when the machine was left unattended.

This wire feed dual voltage welding machine is extremely popular with hobbyist and professionals who are serious about welding. It is capable of different welding processes for a variety of different metals including steel, aluminum and stainless steel.

The machine has an attractive sleek design that comes in a gunmetal color with a black control panel. Everything you will need to get started right away is included in the kit with one exception, the power cord! The machine comes with a nifty on/off foot switch and all of the cables necessary to connect it to a 110V or 220V power supply.

If you love this brand you can check out other PrimeWeld model.

Read more: Top 10 Best Wire Feed Welders For Beginners.

6. ANDELI MIG-270SE Dual Voltage MIG Welder

The ANDELI MIG-270SE MIG Welder is a 110V/220V Dual Voltage 200A MIG Welder that is not Limited by Power Supply and is Convenient to Carry. This welder can directly control current/voltage, super perfect welding experience. Synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses.

Suitable for 0.023″, 0.030″, 0.035 “, 0.039″MIG wire and utilizing the efficiency and reliability of multiple IGBT inverters allowing a huge increase in duty cycle! meaning you can push this powerhouse to the limit and beyond!

ANDELI MIGWelder is a breakthrough machine, Real 200AMP output current, strong input makes you fall in love with welding. If you looking for budget friendly dual voltage mig welder then ANDELI MIG-270SE is a best choice for you.

Read more: 7 Best Welder Plasma Cutter Combo.

7. YESWELDER Digital MIG-205DS Dual Voltage

YesWelder’s digital Mig-205ds is a transformer less MIG welder. The machine uses a wire feed system to help maintain a constant flow rate of wire and control the quality of the weld. The wire feeder can handle up to 33.9 pounds of wire per minute which makes it a good choice for welding lighter gauge metals such as aluminum or steel.

The dual voltage feature on this machine allows you to use it anywhere in the world with its 110-220V power supply. All you have to do is changeover the polarity of the plug and hook up the welding machine.

This MIG welder comes with a number of safety features that protect the welder against overheat, too much current, or short circuits. It even comes with a built-in work light to help illuminate your workspace while you work.

YesWelder Digital Mig-205ds is an excellent option for novice welders who are looking for an affordable machine to get started on.

Learn more: 5 Best Multi Process Welders Under $1000.

8. AUTOGEN 220A Dual Voltage MIG Welder

The AUTOGEN 220A MIG Welder is a dual voltage 110V/220V that provides a range of welding functions. This means the welder can be used for gasless and gas welding, ARC(MMA) and MIG welds with 3 in 1 modes. The welder has an up to 220A output current which is able to weld mild steel up to 3/16 inch (4.5mm) plate.

It also has an 85% maximum duty cycle as well as hot-start and anti-stick features that make it easier to start the arc when welding thick materials. It comes with 6x current settings along with variable feed control for flux core wire of thin steel, stainless steel or aluminum metal plate and even thicker steel welding.

AUTOGEN 220A MIG Welder also has multiple protection features including over current protection, over load protection, temperature control, and if the duty cycle is exceeded.
In a dual voltage welder, the voltage setting can be set to 220V or 110V. This can be done by switching the power button or simply through a simple manual adjustment.

This machine is capable of using a wide range of welding techniques for both steel and aluminum, as well as many other metals with the right flux core wire and shielding gas. The AUTOGEN comes with a full range of control options which include power selection and voltage changeover.

AUTOGEN comes with an integrated color display which makes it easy to select the various welding processes that you can use including MIG, Flux Core, Stick, and more.

Read next: 5 Best 180 Amp MIG Welder.

9. TOOLIOM 200A Dual Voltage MIG Welder

The TOOLIOM 200A MIG Welder is a welding machine that has multiple functions in one low cost, powerful and easy to use machine. The main feature of the TOOLIOM 200A is that it can weld mild up to 5/32″ (4.0mm) plate. This makes it suitable for MMA, Lift TIG and flux MIG welding on mild steel. It’s also Capable of welding nickel-based MIG wire. It is really suitable for DIY projects and light fabrication.

While keeping the outside simple, inside the TOOLIOM 200A has a built-in precise data processor that can achieve flexible welding parameters for various welding processes (MMA, lift TIG, flux MIG). The weld-time is easy to adjust and select by adjusting computer screen for welding speed. This can be done via the control panel.

The multi-function of this unit makes it suitable for a wide range of applications. It can be used as an industrial use machine (for large scale projects), or a small-scale DIY machine in workshop or home garage. Most importantly, the low cost of this unit means that everyone can afford one, which allows everyone to have one in their garage/workshop. It is ideal for DIY projects and light fabrication.

To ensure type safety, the machine’s circuit protection is equipped with the built-in high voltage-low voltage (HV/LV) protection. In addition, the machine can be used to set and store user data via its menu system. The menu is easy to use and can accept up to 200 parameters, which can be selected by clicking a button on screen or touching pushbuttons on control panel.

Check these 6 Best Welding Rod For Manganese.

10. MYYWELD Dual Voltage MIG Welder

The MYYWELD MIG Welder is a A-class MIG welder that comes with a 60% duty cycle and is compact in size. It has multiple welding modes including MIG, MMA, AC/DC TIG and Stick. It also has auto feeding wire function to make the process simple for users. This welder can handle wires from 0.8/1.0 mm in diameter and will handle materials up to .030’ thick.

MYYWELD comes with a range of safety features and protection. It has overcurrent, overvoltage and short circuit protection to prevent the welder from being damaged. It also comes with a built-in light to help you see your work area in the dark. The MYYWELD is ideal for those who want a compact MIG welder that is easy to use and comes at an affordable price point.

Reliable and lightweight, this MYYWELD MIG Tig stick welder will be your go to welding machine no matter the occasion. It is designed for a variety of projects and materials, which makes it perfect for home repairs and hobby projects on light gauge steel.

With 220 volts of power and a 130 amp motor, this welder is lightweight and portable. The AC adapter is also included with this welder, which ensures that you’ll never be without power for your projects. Features such as an automatic standby mode and 2-pounds welding wire make it a great choice for beginners but one that even those with experience will love.

Lastly, this dual voltage MIG welder is a perfect solution for auto repair and home projects. With its manual choke, you can use it whenever you want, or turn it to automatic. The automatic trigger makes this welder far more convenient than any other model on the market.

Read more: 6 Best Tungsten For Tig Welding Mild Steel.

Final words

In my opinion, a good dual voltage welding machine is one that offers users the ability to switch between two types of voltages. This makes it easier to switch from 110V to 220V and vice versa. And a good welding machine will have a range of settings as well as multiple configurations that make it easy for users to change the settings on their own.

The best welding machines offer the best range of settings and are considered to be more versatile and easier to operate than other machines. Of course, the price is always a deciding factor when making your purchase. Most manufacturers have dropped their prices to near $2000 and below for one of these machines. Some offer user-friendly features such as automatic wire feeding, shielding gas controls and power selection buttons that make it easy enough for even the most novice welder to use.

I hope this guide helps you in choosing the best one for your purposes.

Note: ElectroWeld is reader-supported. If you click a link and buy something we may receive a small commission at no extra cost to you., learn more on disclaimer.

Leave a Comment